OVERVIEW
Please note: Cable not included
The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the NTG1 native 20Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.
The RØDE NTG1 shotgun microphone is covered by RØDE Microphones’ industry leading 10 year warranty.
SUMMARY
Direction: Super-Cardoid
Microphone Type: Super-Cardoid (Shotgun)
Phantom Power: 48
INCLUDED IN BOX
Rode NTG-1 microphone.
WSVM Wind shield.
ZP1 Padded Zip pouch.
RM5 Mic clip.
About The Rode NTG-1 Microphone
Please note: Cable not included
The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the NTG1 native 20Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications.
The RØDE NTG1 shotgun microphone is covered by RØDE Microphones’ industry leading 10 year warranty.
Power P48 (48V) phantom supply
Acoustic Principle Line gradient
Directional Pattern Super Cardioid
Frequency Range 20Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
Output Impedance 50Ω
Signal Noise Ratio 76 dB SPL (A – weighted per IEC651)
Equivalent Noise 18 dB SPL (A – weighted per IEC651)
Maximum SPL 139dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Voltage -15.4dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Weight 105 g
Dimensions 217mm H x 22mm W x 22mm D
Broadcast sound quality
Low noise circuitry
Super-cardioid polar pattern
Condenser transducer
Rugged metal construction
Two step High Pass Filter (Flat/80Hz)
Low handling noise
Low weight – 105g (3 oz.)
Includes mic clip, wind shield and zip case
Ideal for professional applications within the film, video, television and production industries
Reviews
There are no reviews yet.