Teradek Battery Plate – 500XT And 1000LT V-Mnt

£177.00 Ex VAT

Category:
OVERVIEW
Teradek TER-BIT812 (TERBIT812) Single Battery Plate 14.4V for Bolt 500XT and 1000LT – V-Mount teradek-ter-bit812-single-battery-plate-v-mount / 11-0812. This Single (Female) Battery Plate from Teradek allows you to secure a Gold or V-Mount battery directly to Teradek Bolt 1000 LT, Sidekick XT and 500 XT Receivers and provide power internally. Machine Anondized, with 2 P-Tap outputs can provide power for additional accessories.

Please select which mounting option (Gold or V-Mount) you would like.
Please be aware, there are other battery type plate options available, including Sony L-series and Canon LP-E6.

To install:

Position both the receiver and battery plate facing up with the video connectors on the receiver facing right.
Remove the cover plate on the receiver to expose the internal JST connector.
Place the riser plate in between the receiver and the battery plate so that the holes on the riser plate align with the threaded holes on the receiver.
Connect the internal connector from the battery plate to…

SUMMARY
Battery Mount: V Mount
INCLUDED IN BOX
  • 4 x M3x12mm Socket Head Screws
  • 4 x Screw Phillips Head M2 x 6mm
  • 1 x Gold or V-Mount Female Battery Plate
  • 1 x Riser plate

    About The Teradek Battery Plate – 500XT And 1000LT V-Mnt

    This Single (Female) Battery Plate from Teradek allows you to secure a Gold or V-Mount battery directly to Teradek Bolt 1000 LT, Sidekick XT and 500 XT Receivers and provide power internally. Machine Anondized, with 2 P-Tap outputs can provide power for additional accessories.

    Please select which mounting option (Gold or V-Mount) you would like.
    Please be aware, there are other battery type plate options available, including Sony L-series and Canon LP-E6.

    To install:

    • Position both the receiver and battery plate facing up with the video connectors on the receiver facing right.
    • Remove the cover plate on the receiver to expose the internal JST connector.
    • Place the riser plate in between the receiver and the battery plate so that the holes on the riser plate align with the threaded holes on the receiver.
    • Connect the internal connector from the battery plate to the receiver’s internal connector, then insert and tighten the four M2 x 6mm Phillips screws.
    • Insert the M3 x 12mm screws through the battery plate and riser plate, into the receiver. Tighten the screws.
    • Compatible with Bolt 500XT and 1000LT
    • V-Mount
    • 14.4V

Brand

Teradek

Reviews

There are no reviews yet.

Be the first to review “Teradek Battery Plate – 500XT And 1000LT V-Mnt”

Your email address will not be published. Required fields are marked *